[lbrown]

I did not I was told by the previous user that it was a plug & Play affair, Please tell me more about this setting. The PCV unit was supposivly mapped for this set up thats whats making this a little fustrating, its not like the old bike where you can just turn a screw to adjust the carb.

with a computer hooked up to the pwr comdr (and the software on the computer) you will see on the right side of the pwr cmdr window the throttle position. it should say 0 with the throttle closed and 100 with the throttle completely open. if it doesn`t go to tools along the top and open the throttle set window. you probably will have to have a 9 volt battery and the little harness to hook it up to the pwr cmdr to set the throttle position without the motor running.

 

[lbrown]

just a quick question.. did you set your throttle positions on the pwr cmdr when you installed it. if not that could be the problem,