Harley Davidson V-Rod Forum banner
1 - 1 of 1 Posts

· X - Kschues
1,327 Posts
This is from memory, so I may be a bit off. I think all that you need is a 12 point 1/4 inch socket. Sometimes this is hard to get all the way on the pin. (there is not much working room between the pin and the housing) I can not remeember if i had to removee the shock or not.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.