I recently aquired a set of midcontrols for my 2009 Night Rod Special. Does anyone have this combination (mids and pipe) and can tell me if the brake pedal (rear) inteferes with the pipe when depressed. It is hard to tell clearences without actually installing.
Setting-up Mid Controls and V&H comp 2 into one
1 - 2 of 2 Posts
Joined
·
8,608 Posts
It shouldn't I believe that you have the same stock exhaust pipes as the bikes that use the Mid controls, D and R models. If you had an A model they would not fit.
Look at the lower rear frame triangle to see if the mounting holes are there for the left side peg mount. The right side requires the proper right side lower frame rail for the master cylinder attachment.
Look at the lower rear frame triangle to see if the mounting holes are there for the left side peg mount. The right side requires the proper right side lower frame rail for the master cylinder attachment.
1 - 2 of 2 Posts
Join the discussion
