[UPSMAN]

what is ?

Xoxoxo

 

[UPSMAN]

Dyno sheets on Pingel set-up

this is what they sent us so far as of yesterday.

Nitrous Oxide kit on Donna's 2003 VROD. The numbers are pretty
> impressive. Our baseline run we had a best reading of 107.9 HP and 73.5
> Foot-pounds of Torque this is a stock VROD without any motor modifications
> other than Vance & Hines exhaust a K&N air cleaner and a Power Commander
> with a map downloaded off of the internet. We installed the recommended
> jetting from NX for a 20 HP shot and ended up with a best run of 134.9 HP
> and 105.5 Foot-pounds of torque. We gained 27HP and 32 foot-pounds of
> torque. We also did the 30HP shot we ended up with a max HP of 142.2 and
> 116.7 Foot-pounds of torque. This was a gain of 34.5 Hp and 43.2
> foot-pounds
> of torque. All of the runs were made the same day with the same weather
> conditions. The heat range of the motor was also carefully monitored. The
> runs were all done as a 4th gear roll on starting at about 3000 RPM we
> were
> able to engage the nitrous at this RPM with out lugging the motor on the
> Dyno.

( Looks like AFR is a little rich as a safe gaurd, prob. fine tune to a few more pony's) Rob

 

[UPSMAN]

Johnny!

.... would it have come with a purge valve so I could look cool at red lights? :hiding:

I cant believe you just said that!!!

 

[UPSMAN]

PINGEL coming to KC

Been working with our sponsor Pingel and I can now tell you they are bringing the rig to The Reunion, with shifters ( also for Street Rod now) and yes NOS kits ( I dont know a price) and whatever else they can get together, Donna is bringing her 03 with the kit on it ( from the Dyno sheets posted) so we can see how the instal looks.