Harley Davidson V-Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
56 Posts
On your second question, you just have to drill in the back. When its losend just pull the baffel backwards. It will come of pretty easy, at least my did. The baffel is just welded in the back on the DX. Search the forum and you will find the dimension on the holesaw to drill. Ill guess if its bigger than the baffelhole and smaller than the cap mounts, your in the right state at least.
 

·
Registered
Joined
·
56 Posts
Btw you can drill it with the mufflers on the bike. just measure the inner dia of the capmount and there you have the size of the holesaw. The capmount are welded on the outside of the ring so you cant mess it up. The capmount ring guides the holesaw from twisting and if i didn´t know better i´ll guess they did the muffler prepared for modding.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top