Harley Davidson V-Rod Forum banner
1 - 1 of 1 Posts

·
The Heavycycles Guy
Joined
·
6,785 Posts
if anyone wants to do it without splicing (ouchies), here's the H-D part numbers for the contacts that will go on the wires and fit into the stock connectors: 73191-96

Instructions for the removal and insertion of the contacts are in the service manual (you do have a service manual?)... even if you don't have a crimper, you can carefully "crimp" the contacts on with a pair of needle-nose pliers and then solder them. MAKE SURE YOU SOLDER THEM!!

If anyone wants the terminals put onto the lights, you could send them to me and for $15.00 (shipping and parts), I'll put them on for you... however, most dealers, if you have a good relationship with them, would probably get someone to crimp them on for you.

BTW, the wires from the signals only need to be about a foot long.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top