Sounds like you are not doing anything wrong, there are no codes stored. Read the first few posts on this thread especially post 9.So , my engine light stays on for a few seconds once started, I’ve gone gone thru P.S.C. It would come up none then Pn32607-02A ; Pn 68920-01C; Pn 67393-01A after each also 61005 then I got END . What am I doing wrong .
Sent from my iPhone using Tapatalk
Sounds to me like you're not reading the display properly.So , my engine light stays on for a few seconds once started, I’ve gone gone thru P.S.C. It would come up none then Pn32607-02A ; Pn 68920-01C; Pn 67393-01A after each also 61005 then I got END . What am I doing wrong ....
...
Sounds to me like you're not reading the display properly.
Most of those "codes" are indications of installed modules;
32607-02A = ECM (electronic control module) flash,
68920-01C = 2005 model TSM (turns signal module no security), and
67393-01A = the IM (instrument module)
However, the 61005 is actually B1005 = fuel sender open/high. That means your fuel level sensor is disconnected.
