Harley Davidson V-Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Hi folks,

Wondering if anyone can help me out with some advice.

I have an '04 VRSCB which has developed an intermittent problem, where the bike will cut out as soon as the throttle is shut down. It will start again with no problem, do the same thing again a couple of times and then be fine for the rest of the ride.

I checked the codes and it came back with a P0505, I cleared it and it has not come back, suggesting it was historic, but the issue remains.

My friend Google suggests that the code relates to the idle air control; looking through some posts it looks like the IAC valve is a bit of a pig to replace.

Does anyone know if it's possible to
a) clean the existing valve in-situ rather than risk shearing the bolts trying to remove it
b) whether there is anything else that could be causing the problem and how I could check this?

I am rather un-mechanically minded, but could follow one-syllable instructions before giving it to a mechanic! :)
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #4 ·
Thanks Ron - I'll have a look at whether I think I'd be comfortable doing this!

Now, if this is happening during a ride and coming to a stop, at which point it quits or slowly drops rpms to the point of quitting but when you turn the key off then back on, it idles normally, the culprit could be the VSS. It's the cheaper of the two, but I'd do the IAC first as it's the most likely cause.
Yes, this is essentially what's happening. I'll ride for ages (whole rides sometimes) with no issues. Then suddenly I'll pull up to a set of lights and the bike stops, I'll re-start it and as long as I keep the revs up it will run OK, it might then do the same thing a couple of times until I give the bike a handful and the next time I pull up it will all be ok again.
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #6 ·
Thanks Rusty - that's my real fear to be honest, I've seen some horror stories about the bolts snapping off and I definitely don't have the know-how to start drilling and re-tapping the body.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top