[Johnjohn8569]

I just bought a 2003 v-rod, 100th annoversary, and I love it!! The only problem is the foot brake and shifter are straight up instead of laying at an angle making it so I have to lift my leg to shift down or use the back brake. I took the assembly apart and from the looks of the set up it isn't adjustable, any help would be GREATLY appreciated, thanks, JOHN.

 

[Kevinmach1]

Do a search, it will yield many options...

 

[Kevinmach1]

Here is what I ended up doing..... I'm 6'4" and have a 36" inseam by the way.

http://www.1130cc.com/forums/showthread.php?t=148037

 

[R34]

The Foot brake i'm waiting to hear about too but the shifter can be adjusted by removing the arm off the gearbox shaft and rotating it a couple of splines around (assuming yours is same set up as my 2011)

 

[usanigel]

Under the pivot pin is a nut just above the piston for the master cylinder. You can turn that nut to change the position of the brake pedal.

For the gear shift, small changes can be made by adjusting the rod length. You can also move the lever on the shifter shaft by a spline.