Harley Davidson V-Rod Forum banner

Hot Toppers

1024 Views 15 Replies 8 Participants Last post by  ElrodontheV-Rod
Has anyone done the Hot Topper thing. Seems expensive but if it covers every little ugly bolt, it might be worth it.

1 - 3 of 16 Posts
I prefer the allen hole plugs used in conjunction with the chrome hardware (chrome allen bolts) HD sells for the V-Rod. This is what I went with. Reason being is that these toppers are a bit(h to get off, whereas the allen hole plugs are easily installed and easily taken off.


I bought mine from my local dealer. However, they do have them on the HD website, just not under the V-Rod section.

Here's the link for the plain ones

And here's the link for the bar& shield ones

They only come in standard sizes, however if you buy the closest size and then bend the pins a little they fit just fine.
See my earlier post for the links for the allen hole plugs (plain & bar & shield).
The chrome hardware kits are under the Decorative section - page 2
1 - 3 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.