Harley Davidson V-Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I am attempting to wire a LED turn signal/brake light onto my 2015 NRS and I'm not sure which wires to splice into on the pigtail. I can't seem to find a thread on the site, any help would be appreciated!
 

·
Registered
Joined
·
18 Posts
1 / blue wire on bike side; black wire on component side / from LIGHTS fuse to license plate lights hot
2 / black wire on bike side; black wire on component side / from license plate lights ground to ground on front cylinder head
3 / brown wire on bike side; violet wire on component side / from turn signal module pin # 6 to right turn signal hot
4 / black wire on bike side; black wire on component side / from right turn signal ground to ground on front cylinder head
5 / violet wire on bike side; violet wire on component side / from turn signal module pin #5 to left turn signal hot
6 / black wire on bike side; black wire on component side / from left turn signal ground to ground on front cylinder head
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
1 / blue wire on bike side; black wire on component side / from LIGHTS fuse to license plate lights hot
2 / black wire on bike side; black wire on component side / from license plate lights ground to ground on front cylinder head
3 / brown wire on bike side; violet wire on component side / from turn signal module pin # 6 to right turn signal hot
4 / black wire on bike side; black wire on component side / from right turn signal ground to ground on front cylinder head
5 / violet wire on bike side; violet wire on component side / from turn signal module pin #5 to left turn signal hot
6 / black wire on bike side; black wire on component side / from left turn signal ground to ground on front cylinder head
Thank you sir
 
1 - 3 of 3 Posts
Top