Harley Davidson V-Rod Forum banner

1 - 3 of 3 Posts

·
Banned
Joined
·
248 Posts
Discussion Starter · #1 ·
Ok so I am beginning to put back together the front end of my bike and of course I forgot to measure just how far my fork tubes are to be in the triple tree. So I am asking for anyones help. I have an 05 A. I need to know the measurement between the top of the fork and the top end of the triple tree ring in order to assure I am getting the proper clearance. Thank you for your help.

Malac
 

·
Brick in the wall
Joined
·
1,125 Posts
First off remember the measurement will be different all around due to the way the fork tube sits in the tree... dead center standing in front of the bike looking back I have 3/8" on mine from the top of the tree to the top edge of the fork tube (not to the top of the forkstem cap) I measured very carefully before I took it apart No difference in 04 and 05
 

·
Banned
Joined
·
248 Posts
Discussion Starter · #3 ·
This Is Exactly The Info I Needed. This Forum Is The Greatest Place On The Planet For Vrod Information Hands Down. Thank You Very Much And I Will Continue To Re-assemble. All Be Safe.

Malac
 
1 - 3 of 3 Posts
Top