[4stroker]

I'm guessing several people have removed the stick-on factory reflectors that came on the bike. If so, is there an easy way to do this with minimal residue?

 

[sgtrage]

Carefully follow these instructions:
1. Pull off reflector
2. Rub off residue with thumb
3. Repeat step 2 until glue gone

 

[creep]

WD40 will get them off quick

 

[Pondo]

Carefully follow these instructions:
1. Pull off reflector
2. Rub off residue with thumb
3. Repeat step 2 until glue gone

I did the caveman technique too. Some people use hair dryers to heat them up and some use dental floss to get under them, but I just grabbed them and ripped them off. Broke one in half, but I was throwing them out anyways.

 

[screwatts]

used a little fishing line and shes gone

 

[mc 88]

Pry them off gently... thay are stuck on with double sided tape so they come off easily.

Any glue left just rub off .. A two minute mod

 

[speed nut]

start with fishing line or the dental floss.

 

[JollyJeweller]

BFI worked for me....Brute Force and Ignorance !

 

[Troy]

Probably wasn't necessary but I heated mine with a heat gun and they came right off with nothing to clean.

 

[lakedrunk]

mine came off and didn't leave hardly any glue, what was left just rubbed off with my :thumb: