Harley Davidson V-Rod Forum banner
1 - 1 of 1 Posts

· VRRRRRROD!
Joined
·
3,173 Posts
I'm sure Doc can tell you more, but check & see if your LEDs have resistance built into the wiring to limit the current draw to milliamps.
LEDs by themselves have a very low resistance. So if they are wired without resistance, the circuit will draw a LOT of current, similar to a dead short!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top