[Christine]

If you need a clock on your bike this is a good place to put one

 

[Christine]

It's unobtrusive - you can't really see it while you're riding.
But it's there if you need it.

This is marketed as a bike clock but I have seen this done with a watch with the strap holders filed down.

 

[Christine]

Of course fitting it was quite difficult. I had to peel the backing off BOTH sides of the sticky tape

 

[Val]

:rofl3: :rofl3: :rofl3:

Looks great, Christine! Great work on the installation, too!

 

[Frank Storms]

Christine


Where did you get the clock?

 

[ErVikingo]

Frank,

I don't see the VRod but what about these:

http://www.clocks4bikes.com/

The Mo.Co. has one also but (personally) its a bit large. Breathless has an Oil temp mount which could work for a clock. Ideas???

Cheers, Juan

 

[Christine]

Christine


Where did you get the clock?

It's by Motrax
http://www.motrax.co.uk/Accessories/Littleben.html

Don't know whether you can get them there.
(I note that it's water resistant to 30 meters. I don't plan on testing it )

 

[Christine]

I don't know whether you can get them there.

Seems you can though not in Florida

http://www.motrax.co.uk/Dealers/Index/World_america.htm

 

[DrHeathenScum]

a V-Rod uses the same fork stem bolt cap as a Softail... FYI

 

[Ketsugo]

Unfortunately, Cycle Gear doesn't carry the clock.

http://www.cyclegear.com/dept.cfm


BTW Christine,
You lied! You previously stated your bike was completely stock!


John

 

[Max]

a V-Rod uses the same fork stem bolt cap as a Softail... FYI

But shouldn't the V-Rod have a little faster clock?:rofl3:

 

[DrHeathenScum]

I designed a really slick billet cap that has a hole for the Formotion clock that also fits in the Custom Chrome butt-ugly stem nut cap.

It's being manufactured by BilletBoys and should be out soon.

If anyone is interested, I'll post as soon as it is released.

 

[Christine]

BTW Christine,
You lied! You previously stated your bike was completely stock!


John

Found out
I also have swing arm nut covers and a forward seat
Nothing that can't be reversed in a few minutes

 

[Ketsugo]

Christine,
How is it you have a speedo in MPH and not KM?


John

 

[Christine]

Christine,
How is it you have a speedo in MPH and not KM?


John

We still have miles in the UK. Don't know how long we'll get to keep them. We have litres but everyone converts them and works out mpg.
BTW OUR gallons are bigger the YOURS

 

[Frank Storms]

"I designed a really slick billet cap that has a hole for the Formotion clock that also fits in the Custom Chrome butt-ugly stem nut cap.

It's being manufactured by BilletBoys and should be out soon.

If anyone is interested, I'll post as soon as it is released."


DrHeathenScum

Let me know when you are ready to sell them.

 

[ErVikingo]

Same as a Softtail??? Then check these out. Any feedback?


http://www.marlins-motorcycles.com/clocks/?src=overture

 

[Frank Storms]

http://www.marlins-motorcycles.com/clocks/?src=overture

VRSCB V-ROD ® with our Fork Stem Billet Clock Part # FSBC2

 

[esquire7oz]

Harley makes 2 that i know of, this is 1 of them.

 

[esquire7oz]

Here is the other one.