Harley Davidson V-Rod Forum banner
1 - 1 of 1 Posts

·
Dtown's Mobile Tech.
Joined
·
901 Posts
For the headlight connection I just ordered the stock Harley end and pins for back a little further on the wire, and made my own form that. As far as gauges I went with oil temp, water temp, volt and oil pressure. Also I went with a cheap route from ebay at about $25 a piece if I were you I'd go with a better quality gauge as mine lasted about 6 months before we had issues, some led's out so making hard to read, the oil pressure sensor leaks oil so i removed it. You can buy autometer or ever dakota digital guages for about $80 each and they will last.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top