Harley Davidson V-Rod Forum banner

1 - 20 of 30 Posts

·
Super Moderator
Joined
·
6,248 Posts
Came off an 06
It must have been an overseas model or someone swapped out the 28T sprocket that was put on at the factory.

Based on the marking shown in your picture, I'd say it's an early model (P/N 40341-01) sprocket also. The later model 30T (P/N 40341-04) sprocket was stamped with smaller size characters spaced closer as shown in this picture:
 

·
Registered
Joined
·
93 Posts
Discussion Starter #8
Came off an 06
It must have been an overseas model or someone swapped out the 28T sprocket that was put on at the factory.

Based on the marking shown in your picture, I'd say it's an early model (P/N 40341-01) sprocket also. The later mode2l 30T (P/N 40341-04) sprocket was stamped with smaller size characters spaced closer as shown in this picture:
Entirely possible.
 

·
Registered
Joined
·
434 Posts
you can probably buy new for that price.
I paid $53 for a new HDI 30 tooth back in 2008. It's triple that now. It's cheaper to get the whole kit with the belt and all for about $25 more than just the sprocket alone. If you install a 30 tooth you will probably have to change the drive belt to the longer one.
 

·
Insane inda membrane
Joined
·
13,002 Posts
you can probably buy new for that price.
MSRP is $204.76. Surdyke.com price is $157.17.

So no..you can't buy new at that price.
 
1 - 20 of 30 Posts
Top