Harley Davidson V-Rod Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
19 Posts
I got the 28 tooth and I used the axle extenders and I am worried that they are going to fly out. How can a guy get those pins back out that I had to punch in 1/8 inch?? I really want to go back and forth from the 28 to the 30 and it would be great if I didnt need to use the axle extenders. How are you guys aligning the rear wheel?? I just made sure that the cams are in the same positions on each side.... .Is that good enough??

Brent Bartels
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top