Harley Davidson V-Rod Forum banner
1 - 1 of 1 Posts

·
If You Ain't Cav...
Joined
·
2,069 Posts
First off, you most likely (95%) won't need the axle extenders. The 28 tooth pulley with the '03 belt (the one that came with the 30 tooth) will work, however your adjustment will be ALL of the way out. The belt will be at the proper tension, but you couldn't go further. You can get the '04 belt (made for a 28 tooth pulley, thus a bit shorter) like I did, but you can ride without it.
Mike

I changed mine b/c with the rear tire all the way back, the metz 200, and my fat ass... the tire was rubbing the back of the plate holder when I hit big bumps!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top