Harley Davidson V-Rod Forum banner

13DX Exhaust Gasket Tab Performance

1011 Views 4 Replies 2 Participants Last post by  rbabos
Hey everyone. I have a 13 DX and I purchased a Tab Performance 2-1 full exhaust from a fellow member here and have a question on the gaskets. I know I read that most aftermarket exhausts use the older style gaskets 65109-01 instead of 64971-09 which is what my year calls for. I contacted Tab Performance and they said they weren't to sure on which ones to use. Anyone know the answer here? Should I use the 65109-01 that is for the 02-08? Thanks
1 - 5 of 5 Posts
Well I am having issues trying to get everything lined up so that leads me to believe I need the 65109-01 gaskets. Also the exhaust has 18mm o2 sensor bungs. Which I think would indicate it is for earlier years as well. Instead of using reducers I will go the target tune route with the power vision.
Well I am having issues trying to get everything lined up so that leads me to believe I need the 65109-01 gaskets. Also the exhaust has 18mm o2 sensor bungs. Which I think would indicate it is for earlier years as well. Instead of using reducers I will go the target tune route with the power vision.
Reducers will work but bungs require some trimming to get the sensor tip into the stream. Otherwise O2 sampling ain't worth a damn, nor is the tune in the end. TT would be a good way to go and make use of the WB 18mm sensor.
Ron
Reducers will work but bungs require some trimming to get the sensor tip into the stream. Otherwise O2 sampling ain't worth a damn, nor is the tune in the end. TT would be a good way to go and make use of the WB 18mm sensor.
Ron
Thanks for the feedback. Yeah exactly what I was thinking, even though it was another expense I know I will be happier in the long run.
Thanks for the feedback. Yeah exactly what I was thinking, even though it was another expense I know I will be happier in the long run.
Sounds like a good plan.
Ron
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top