Hey Guys, I have an 07AW I'm looking to put a 12 volt receptacle on to plug in a tomtom that I most likely will need when I get to a city I've never been to later this month. Any location ideas? Thanks.
I put one on the Heritage I had and one on my wifes Dyna in front of the battery box but can't seem to find a PERMANANT location for the big ass thing on the V. The other bikes had many places to hide it. Thanks again
Ok, dumbest question ever I'm sure. But, I took my levers, rear brake assembly, shifter assembly and shift linkage in for powder coating. I got everything back and it all went together fine until I put the linkage back on. I didn't adjust it, left it where it was originally, and now the shifter...
Here is how to mount and install the Street Magic signal stabilizer.
Remove the Maxi fuse.
Remove the passenger seat and locate the TTSM (turn signal secutity module) .
Use double sided tape and tape the signal stabilizer to the back of the TTSM towards the rear wheel.
Re-mount the TTSM and...
Ok so I have an 07 vrod which I tried swapping the seats and rear fender over on with 2015 i think parts which I have as you can see tried and to me there is no chance it is a striaght swap barring cutting the frame up and fabricating. Am I missing something? I probably should have checked...
The following information is based on these criteria:
-Narrowed rear pulley and narrow SE belt
-standard front pulley, offset pulley will work also but not needed
-brake tab notched for clearance of tire
-either stock wheels, pulley, compensator bowl, spacers, or aftermarket wheels, pulley...