Harley Davidson V-Rod Forum banner

wide wheel

  1. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  2. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  3. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  4. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  5. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  6. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  7. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  8. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  9. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  10. Custom Fender

    Custom Fender

    12.5" fender blank installed and my initial M or McCall flush mounted into the rear of the fender. The entire M lights up for the tail light. The V lights up for the brake light. The legs of the M light up for the L and R turn signals.
  11. 180 to 300 before and after

    180 to 300 before and after

    Comparison before and after stock 180 to 300
  12. 180 to 300 before and after

    180 to 300 before and after

    Comparison before and after stock 180 to 300
  13. 180 to 300 before and after

    180 to 300 before and after

    Comparison before and after stock 180 to 300
  14. 180 to 300 before and after

    180 to 300 before and after

    Comparison before and after stock 180 to 300
  15. 180 to 300 before and after

    180 to 300 before and after

    Comparison before and after stock 180 to 300
  16. 180 to 300 before and after

    180 to 300 before and after

    Comparison before and after stock 180 to 300
  17. Skipmccall's 300 tire install

    Skipmccall's 300 tire install

    300 Avon tire, Gorby's Machine CNC Wheel widened by Sandy Kosman. Had to massage the inner fender to flare it out enough to stop it from rubbing the tire so that I could test the setup. The new fender that I designed will look a whole lot better.
  18. Skipmccall's 300 tire install

    Skipmccall's 300 tire install

    300 Avon tire, Gorby's Machine CNC Wheel widened by Sandy Kosman. Had to massage the inner fender to flare it out enough to stop it from rubbing the tire so that I could test the setup. The new fender that I designed will look a whole lot better.
  19. Skipmccall's 300 tire install

    Skipmccall's 300 tire install

    300 Avon tire, Gorby's Machine CNC Wheel widened by Sandy Kosman. Had to massage the inner fender to flare it out enough to stop it from rubbing the tire so that I could test the setup. The new fender that I designed will look a whole lot better.
  20. Skipmccall's 300 tire install

    Skipmccall's 300 tire install

    300 Avon tire, Gorby's Machine CNC Wheel widened by Sandy Kosman. Had to massage the inner fender to flare it out enough to stop it from rubbing the tire so that I could test the setup. The new fender that I designed will look a whole lot better.
Top