Harley Davidson V-Rod Forum banner
piston skirts
1-12 of 12 Results
  1. milling

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  2. Conflict resolved

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  3. machinists helper

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  4. milling

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  5. Business end of the Helper

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  6. Side wall near Oiler needs milling back

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  7. See the strike point half way across skirt

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  8. Skirts at V are OK.

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  9. Side wall near Oiler needs milling back

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  10. Oiling Crank Pin

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  11. Case to Skirt Conflict!!!!

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
  12. Oiling bearings

    The case boring was not sufficient for the pistons, the CP skirts are longer than the former pistons.
1-12 of 12 Results
Top