Harley Davidson V-Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 47 Results
  1. V-ROD EFI
    Bike has rough idle bouncing so bad. Was worse when I got it from the dealer when I bought it. They were supposed to fix it but they didn't. It's a 2012 VRSCDXANN 3200k and it sat for a long time I'm thinking. The salesman insisted it just needed some seafoam in the tank so I treated 4 tanks...
  2. Engine and Transmission
    Hi guys! I just made one of the more idiotic mistakes of my life. I did my yearly service last week, had an oil leak wich I fixed, but then I put too much oil in. So my plan was to use a pipette To just suck some of it out, then the syringe part of the pipette fell off and down in the oil🤦 Is...
  3. VRSCDX
    I disassembled the air of to replace the back breather tube on a 2012 Night Rod Special. In the process of setting everything aside and waiting for the part to put it back together, my significant other moved a bunch of things in the garage, and now I cannot locate the metal tube (“rifle shell”)...
  4. V-ROD General
    I picked up a 05 vrsca last year and have been going through some much needed maintenance on the bike. After riding it for a few months I found under heavy acceleration the rpms would jump immediate thought was the clutch needs replaced (original never changed) I ordered the slipper and threw it...
  5. Wanted
    Looking for the HD big bore kit with new pistons sleeves and heads
  6. Engine and Transmission
    Hey friends, New to the forum and I appreciate any info you can give me. I've bought this 2004 VRSCA sight unseen. I'm picking it up in two weeks. I was just wondering if something sounds "Off" to any of you?. I'm not afraid of putting work in to get the bike I want but I hope it's not some...
  7. Engine and Transmission
    I have a 2003 vrod and while changing fuel pressure regulator i somehow dropped a torx bit into throttle body unknowingly..started bike and heard slapping noise turned off immediately. Was able to make a long magnet after discovering the bit and got it out.. But now i have coolant leaking in...
  8. V-ROD Mechanical
    Had fuel come out of my 2007 VRCSDX exhaust where the pipes are clamped near the foot pegs after trying to cold start several times. Besides replacing spark plugs and changing to fresh oil, what else can I do to make sure there isn't any fuel left or engine damage? Could I even siphon out...
  9. Engine and Transmission
    Looking to find the best place to get the work done on my heads. Is the Fitzgerald race ready port worth it? Really only looking to do heads and cams. Nothing lower in the motor than that. What are good alternative places to have the heads done?
  10. The newest home made tool.

    Split the cases
  11. In the run position (Flipped)

    Split the cases
  12. Crank surfaces look good

    Split the cases
  13. Side by Each

    Split the cases
  14. In the run position (Flipped)

    Split the cases
  15. Wall Scuffing looks worse that feels

    Split the cases
  16. Con Rods OK.

    Split the cases
  17. Wall Scuffing looks worse that feels

    Split the cases
  18. Front Pistion Rear Skirt

    Split the cases
  19. Front Pistion Rear Skirt

    Split the cases
1-20 of 47 Results
Top