Harley Davidson V-Rod Forum banner
Showcase cover image for Biz's custom

General Information

Year
2008
Make
Harley-Davidson
Model
v-rod DX
Color
Maroon/Rootbeer/Black? maybe
2008 Harley-Davidson v-rod DX (Maroon/Rootbeer/Black? maybe)

Modifications

Interior
cermaic coated tab tails on exhaust.welded up the holes for the rivets. ceramics by Advanced paints and coatings in cleveland oh. Tab tuner box too!
Exterior
Blacked out all stainless and powdered all aluminum pulley and damper disk, pedals and levers,fork tube covers, have to watch the length as the tree spacing is now held apart by these and neck nut can not be tightened if need be with out possible tweeking of the trees or re cutting the tubes. re machined to fit with led run turn light . Made custom lower tube covers with steel upper parts and Delrin leg extentions to clear the fender!
Made a new fender in process of lighting with Radianze Tail light bar with turn signals in one and wiring and then paint and seat pan. Lot of time to fab but the big pain is where the wires and electonics. where to fit it all?
Audio
Tired of the unavalible bars from rizoma and the cost ,the unnecessary change in speedo cluster,when the new speedo looks like the old one so made my own,Also a different bracket for the old cluster!saved about 220.00 from listed prices for biz new air shocks to see upper pics
Suspension
Rear foot peg relocators 3/8 crs steel and powdercoated, same weight as the aluminum ones (3/4 thick) and as strong, 1/4" from Fuel tank and belt guard ! Use old pegs and pins no need to buy peg brakets these are part of the relocators, others you need to buy softail passenger peg brakets another $35.00 add $188.00 to the price of the bracket = $223 plus shipping , these are $175 with shipping and powder coating! Tucked in when not in use too!Also have new swingarm mount for $300 look at pics at bottom 12 position possibility for many exhausts
IF YOUR WORRIED ABOUT THE WEIGHT YOU SHOULDN'T HAVE A PASSENGER ,They weight about the same as 3/4 in thick aluminum ones!
[email protected] or
4406536103
Wheel and Tire
Tab tuner box too! 12 position swing arm Peg kit $300 shipped free US only international as per where it is going$$(AUSTRALIA WAS $60 Shipping!!)

Gallery

Comments

There are no comments to display.
Top