Harley Davidson V-Rod Forum banner
1 - 13 of 13 Posts

KCK_Fireman

· Burn Baby Burn!!
Joined
·
700 Posts
Discussion starter · #1 ·
I bought Kuryakyn small halogen bullets to relo my front turn signals but didn' t realize they are for either running lights or blinkers but not for both and Kuryakyn sells the harness to do both together but it' s another $50. Is there a way around this or should I return these and go with something else. I like the small bullets style and want to stay with that scheme.
 
Discussion starter · #3 ·
It also doesn' t say if it fits the V-Rod. Says 96'-05' Softails, 96'-05' Dynas, Dressers, Road Kings and 97'-05' Sportsters. Will it still work?
 
Discussion starter · #7 ·
Ok...I talked to Kuryakyn today and they were not sure if their harness would work on the V (go figure...hard time finding dealers that know anything about the V). Can anyone tell me if they have used this harness http://www.kuryakyn.com/products.asp?bn=Harley&ci=2551 before? I turn to you all since Kuryakyn techs had no clue.
 
KCK_Fireman said:
Ok...I talked to Kuryakyn today and they were not sure if their harness would work on the V (go figure...hard time finding dealers that know anything about the V). Can anyone tell me if they have used this harness http://www.kuryakyn.com/products.asp?bn=Harley&ci=2551 before? I turn to you all since Kuryakyn techs had no clue.
the harness will work , just need a little splicing , but the only thng that i notice the harness get really , really hot . that you cannot touch it when the light is on. other choice go with led.s small bullet with three wires and it will be almost same price , with silver bullet halogen + harness and also anything aftermarket turn signals need some splicings good luck
 
angelrod said:
the harness will work , just need a little splicing , but the only thng that i notice the harness get really , really hot . that you cannot touch it when the light is on. other choice go with led.s small bullet with three wires and it will be almost same price , with silver bullet halogen + harness and also anything aftermarket turn signals need some splicings good luck

Something isn't right if that is the case!!!!
 
1 - 13 of 13 Posts