Orienting bushings on 2008 DX clutch and brake levers with collar.

jos · Nov 17, 2008

I,m puting my powdercoated clutch and brake levers back on my 08 DX but i cant remember how the bushings where orientated...
there is one with and one witout a collar ,and if that collar needs to be up or down...
Thanks,Jos

rmartuszewski · Nov 17, 2008

Hope this helps.

It's large, so feel free to zoom into it.

Also it's a good investment to go to your local HD deal and buy the parts book, and service manual. Helps alot.

:moped:

jos · Nov 17, 2008

thanks,this helps alot,i no now that whitout the colar is from the clutch.i only have to find out if the colar on the brake comes up or under.you can,t see that on the drowing.
jos

rmartuszewski · Nov 17, 2008

No clue what your asking, use the numbers to point out the part you are talking about. Then ask the question, because both sides have different parts to hold the handles in.

RustyG · Nov 18, 2008

jos said:
thanks,this helps alot,i no now that whitout the colar is from the clutch.i only have to find out if the colar on the brake comes up or under.you can,t see that on the drowing.
jos

The retaining ring that holds the pivot pins in place goes on the bottom side out of sight.

rmartuszewski · Nov 18, 2008

Oh, is he talking about the C-clips AKA snap rings?

Buy this, alot more for 9 bucks rather than .30 for each.

Bottom of page

http://www.mytoolstore.com/wilmar/prod044.html

Sharkey · Nov 18, 2008

I think the lip on the pivot bushing is on the inside bottom of the lever.... not positive on this....

think about it not wanting to drop out when the lever and pivot pin are installed.....

jos said:
thanks,this helps alot,i no now that whitout the colar is from the clutch.i only have to find out if the colar on the brake comes up or under.you can,t see that on the drowing.
jos

jos · Nov 18, 2008

ok thanks,now i no how to install them.
regarts jos

jos · Nov 20, 2008

by the way,i mean on the clutch partnr.15
on the brake the bussing and partnr is not shown.
regarts jos

Orienting bushings on 2008 DX clutch and brake levers with collar.

jos

rmartuszewski

Attachments

jos

rmartuszewski

RustyG

rmartuszewski

Sharkey

jos

jos

Top Contributors this Month

Recommended Communities