Originally Posted by wiguy85
So I have my 2011 VRod F ripped apart getting cleaned up and inspected. Found a few things to address. Biggest was the coolant clamp to the valve cover chaffing the tube almost through. Got rubber in that clamp now. Installing handlebars and controls and working on other harley's, every wire connected to same colored wire. Got to the left controls and noticed the last 2 wires are not color coordinated correctly. Manual is up north and the bike is not. Can't remember specifics as i post but i remember the last 2 wires were black with color stripe and i think i had an orange and maybe a red/yellow on the control side. Can anyone attach a control wiring diagram or a photo of what their control wiring looks like on the left side?
Yes that is correct. The O/W wire on pin 7 of the control side connects to a BK/R on the loom side and the R/Y wire on pin 8 of the control side connects to a BK/GN wire on the loom side. See your other post for pics.