S/C Gear Ratio
Hello all tech heads,
I'm currently working out the Rotrex S/C RPM on the standard Holy-Moto gear ratio set-up.
32 x 24 & 26 x 26
This gives me a ratio of 1.333333 to 1.
At 9000rpm (redline), this would spin the input shaft at 12,000rpm, just over the spec peak of 11,840rpm.
Now if i add some internal engine work and now peak the engine top rpm at 9,500rpm, based on the above set-up, would spin the C15-60 at 12,667. Thats 7% over the peak RPM.
#has anyone had experience with spinning these SC over the peak suggested RPM?
# As a comparison, what gear ratio is the TTS which i believe runs the same S/C
Thanks for your help