I'm having the same issue. Rode into work, no problems. When I started the bike to leave I got the battery light and service light came on, I rode for 20 miles with the lights on, turned the bike off while coasting on a back road and went to restart and nothing. Popped the clutch and the bike fired up but then it wouldn't idle down and the cluster started to flash. I test the battery, charged it, let is sit for a day and checked the battery again an it was reading 12.75 Volts which leaves me to believe its not the battery. I started the bike and the volts dropped to 12.3 while idling.
Hey rbabos, how do I perform the test on the stator that you mention above? obviously I have to have the bike running, but what should the voltage be? Do I connect the red wire to the stator wire and the black to a ground point on the bike?
Any help would be great.