Looks great. Let me give you a little tip if you are going to stay with that dogs azz. I also have the 240 setup and for now have the dogs azz, but a couple weeks ago i bottomed out. You whould be surprised, but the tire actually hit the 2 bolts that the dogs azz screw into the inner fender. Mine stuck out a 1/4inch past the nut and actually made a slight razor cut around the tire from the threads on the screw.....not to safe!! All i did was shorten the screws to make them flush with the nut heads so there are no sharp points sticking out. I also tightend the pre-load which you should just the same since the wheel with the 240 is heavier.
Have fun with it....you will love it. The v-rod was meant to be 240ed!!