Originally Posted by csmith72
Okay, problem found.
broke down and paid the $8 for PDF versions of service manual, and electrical diagnostic guide. page 24 of EDG had me disconnecting components while ignition off, then turn on and see if the buss er cleared. 2nd step was disconnect ECM and see results.
Well I did not really disconnect ECM instead I removed the dynojet power commander from the circuit and tried that first..... bike has no errors and starts right up now.....
Now all i have to do is figure out if DPC lost its config or is truly bad, either way problem found.
Late to the party but the PC is known to cause a shit load of weird issues. Disconnecting is the first test in diagnosing the bikes issues.