Harley Davidson V-Rod Forum banner

06 VRSCD - Stripped/Loose Handlebars

2K views 4 replies 3 participants last post by  91Vette 
#1 ·
Hey All,

Just got done with a big move from NC to IL. Had the movers load my 06 VRSCD in the trailer for the trip.

Well, after they unloaded it and tucked it into the garage, I noticed the handlebars are now loose. That is, the handlebars will rotate forward or back towards you if you apply enough pressure.

Is this something where I can try to tighten the handlebars? If so, can you advise the process? I did some looking online and did not come up with much.

My tools and service manual are still boxed up in a storage unit, so I am really hoping someone can help out.

Thanks!
 
#5 ·
Thanks for the help, all!

I was able to tighten the 4 allen bolts on the bar clamp and the handlebar is solid once again! I was a bit surprised how loose some of the bolts were, so glad I got them tightened down.

Thanks again!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top