V&H Comp Series 2into1 exhaust
This may or may not have been the correct way to handle this situation, but might be useful to anyone who has or is about to buy this system.
I recently bought and installed a V&H Comp Series 2into1 exhaust system for my 07 D. After installing, it really bothered me that the brackets that came with the system would not fit my model and the megaphone was unattached to the bike and left hanging on by springs. I have noticed that many people have this system on their rides and have left it this way without too many complaints. Not me! Any way what I did was took the system back off and attached the megaphone to the bike with the supplied brackets and seen what it was going to take to utilize them. The front pipe would line up just fine the back pipe was about 1" or so too long. After removing about 3/4" of the section that slides into the collector, everything bolted up with the supplied brackets and now the front pipe sits closer to the frame and the megaphone is about 1 1/2" higher in the back. This will definitely help out with cornering and not being scared to make right hand turns.
Play hard and floor it!
K&N Filter, Top and Bottomless
V&H Comp. Exhaust
10.5" Gas Shocks
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.