the ignition switch does switch on two circuits in ignition setting and one of that is the acc circuit. i think the contact of the acc circuit is intermittent in the switch.
(hazard lights, running lights, brake light, gas level etc is on the acc circuit)
It's a pita job but it's 'serviceble'. there are copper slide contacts inside the switch. clean electric track inside and put new dielectric grease in it. should cure it.
the copper 'crams' are under light load of a small spring. the grease holds all up when assembling just take care when taking apart.
(maybe take care no to hit the switch too much when pressure wash)
CUSTOM BUILD AND DESIGNED SPEEDO COLOR KIT'S !
-Crazy Colors gauge kits for all VR speedo's - BRIGHT!! A cruel cool easy DIY project. >Tread<
website's 'News' page :
- 'DCL-BLF1' Plug 'n Play Brakelight modulator with over 115 patterns and settings
- 'DCL-HLS1' Headlight Switch for HID's
- Electronic software conversion service of MPH to KPH speedo's ! have yours done combined with a light kit now!
- soon: load equalizer