question and some FYI for the 12 and up DX guys
So tonight I was install in my Tabs, having problems with them sealing, and the brackets between the cans is waaayy off, gonna have to do some bending and reaming of the holes. that seams to be the answers i found in searching.
Next installing the airfilter, now I already found out "on the lift during the oil change" that Amsoil doesn't make an oil filter that fits the newer NRS the old oil filter has a smaller center hole and the bike has a larger pipe than previous years. Also the Amsoil air filter that i have is to tall to run with the top on and tin. It holds the tin cover up about 1\2 to 3\4in up over the mounting tabs, will have to check if it will work running topless. Comparing the two side by side and the stock one is a good 1/8in shorter. Anyone else run into this? Lord help me but i am gonna try tuning it tomorrow hahaha.
So what oil filter and air filter are you guys running? not a big fan of the HD stuff.
2012 Night Rod Special, TTS, D&D, ???hp needs tuning
2010.5 CVO Ultra Dark Side, 117in, 117hp, 130ft/lbs
2011 Sportster Superlow 883 "wifes"
IBA Member 45500