Originally Posted by brandonm78
Anyone know how I can get one?
Here is a simple mod to mount the standard baseplate (51120-01A) on an SE2.
Pic 1: Shows the standard baseplate on an SE2
Pic 2: Shows the standard baseplate on an SE2. Bolts are 5mm longer and two 3/8" nylon spacers under each of the plate tips (both available at ACE hardware). Dense stick on foam padding on back of baseplate (available at Lowes) to cushion against fender/paint.
Pic 3 & 4: Shows my homemade (out of 3/16" scrap diamond plate aluminum) rear seat tongue bracket. This bracket/tongue was neccessary to raise/create another tongue 1/4" to catch the rear seat mount.
Pic 5: I bent the tongue tip about 10 degrees (up) to further ease the rear seat mounting. I was amazed how easy it was to work with the aluminum to fab this bracket. I am no machinist. Took me an hour or so.