I'm running an almost stock 2006 VRSCD. Modded pipes, topless, K&N high flow filter & a PC3.
Internals are stock, no cam work, etc.
Still running stock gearing (30 tooth front pulley) .
I did buy a 26 tooth pulley but it won't fit my bike
Currently running the 1/4 in 11.6 crossing the line at 118mph.
Looking to change to chain drive to reduce the gearing. Hoping this will get my 60' times down and cut a few tenths of my ET.
Any tips on what sprockets I should be running front and rear on a near stock 1130?
Don't mind if it becomes unsuitable for long hauls. I have two other Harleys for daily riding and cruising.
The Night Rod is mainly ridden to, from and down the track.