Originally Posted by Demthios
... I want try and wire all this up with OEM style connectors so that they will just be plug in play. I've seen one write up how to wire up the DDG but the others I need some help on figure out what connectors and pins I need to pick up and where from! ...
Harley uses Deutsch (Ladd Industries) and Molex MX-150 series for most of their multi-contact "waterproof" connectors. I prefer the Deutsch mostly because of availability, but the Molex versions that HD uses are slightly more compact. The Deutsch connectors are available from several sources besides HD. I usually use Batts Racing
or Summit Racing
HD uses both the DT and DTM series depending on current load requirements. You don't need the expensive Deutsch crimping tool especially if you use the "stamped and formed" pins and sockets as supplied with the connectors at Summit. There are other crimping devices that will work with these "stamped and formed" versions or you can solder the wires (I usually do both).
If you want to use the Molex connectors, one source is NAMZ Custom Cycle Products