Harley Davidson V-Rod Forum banner

What Size Hex Is The Swingarm Pivot Bolt?

5K views 4 replies 5 participants last post by  sburke91 
#1 ·
I'm pulling my engine and got all the wires and lines out of the way, and then hit this standstill. I don't have allen wrenches that go up to that size, so I need to order one. It looks like a 14mm. Anyone know for sure?

 
See less See more
1
#5 ·
Yep on the 14MM. When I did my tank, I didn't have a way to get the 14MM hex socket, so I used a 14MM grade 5 or grade 8 bolt with the end ground square so I could put a lock wrench on it.

The 2nd time around I got the 14MM hex socket :D

The nut on my bike was on with red loctite. It was NOT fun to get off.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top