Harley Davidson V-Rod Forum banner

ddm hid kit. .help

2K views 7 replies 5 participants last post by  grimy 
#1 ·
I have a 2006 r but have an 08dx front light cowling. Anyone install a dddm kit? I need guidance brothas
 
#4 ·
Can someone PM there cell number. I am having major issues installing it. I purchased DDM 35W & 55W Single Hi/Lo Motorcycle HID Kit. I am having fitment and communication issues.

Again- I have an 06 streetrod but am using an 07/08 DX headligh and cowling.

For anyone that has done this mod- pleae help a brotha out:notworth::notworth:
 
#5 ·
I drilled a hole strait through the back of the housings. Its a tight fit to bring it through the bottom of the headlight. I put the ballast on and stuff on top of the battery and ran the wiring through the front.
 
#8 ·
Hey guys, Im new to harley Im a prior CBR 1000 guy and I grew up around cruisers. I just bought a 13 vrscdx and I hate the low beam the high beam is decent but I had dual HIDs on my cbr, does anyone make a decent kit or have any Ideas were I could purchse one?
shipped directly from china, cheap and with a warranty(but you first have to send them the light...) www.ddmtuning.com is the one the majority of us use.

For info on HID's and our bikes check these 2 threads:

http://www.1130cc.com/forums/showthread.php?t=127010

http://www.1130cc.com/forums/showthread.php?t=107533
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top