Finally got my new laptop - and have installed my frontpage and photo editor. Therefore I am ready to begin work on the site once again. I have been struggling through tech problems the last few months but would really like to start some work on the profiles. So here is my plan
KBOlsen - you get an A for effort and I would like to feature some of your efforts at the track including your ongoing points progress. Rick N. you have two bikes running and I want to do a feature on both. Zij - got to get some highlights of your efforts for this year - although I think that I need to scavange your site since you are already overloaded with publishing for your sites. Kaz - would you like to have your rides featured? I would need some progress reports including status of those two machines, if you are up for sharing some of that top secret stuff - including any saltry tales that could lie ahead. The VA/NC troop also needs to dominate the Rookie section - that is if you like. Are there others out there who are interested. Check out the site and let me know. Jamie - we need to feature the Prostar championship effort - 3 to go and chasing..... I may need to get some of the pictures again - unless my previous computer can be salvaged from the bluescreen loop that confounded me. I will check back with a status on that issue. :lamer: :surrender . I hope that I can get this thing moving soon.... Kevin

That's great, we are all looking forward to the website! :ride:

I'AM IN AS ALWAYS,THANKS KEVIN. :kiss:

...Zij - got to get some highlights of your efforts for this year - although I think that I need to scavange your site since you are already overloaded with publishing for your sites... Kevin
Kevin,
Yes, there's some good stuff on my site. Also, I've been working on MoCo to help me out (no luck yet). Here is my proposal to them:
http://HogWildRacing.com/hd/
Hope you have PowerPoint, Word, and a high-speed connection.
If you can't open those docs, let me know and I'll get them to you in some other form. I can also provide some other bits of info when you're ready for it. But my main focus right now is finding a sponsor. I'm 90 percent ready for Dakar with 5 months still to go, but I'm not going to get there without a sponsor. Worldwide TV and magazine coverage for a large logo on our bike!

Im sure the we can give you a few things for the rookie section.

Matt - excellent - you I think that you would inspire many to give racing a try - plus you never know - success could be on the horizon. Zij - boy would I like to figure out how to help you get a sponsor - you dare to have big dreams.......I will look the site and material over - KSP

Kevin,
Make it 3 V-rods now as I bought a Frame with title and Melted Motor from Sandy to Build up as a Dedacated Racer!Maybe we can have him do a Build up story on it!The Turbo Bike is Getting Bigger injectors and a Custom NRP Nitrous system"300+rwhp"My NOS bike is being Big Bored by Sam and Matbe a New Turbo systen! ;)

Kaz - #3 - man you are scaring me - but you always have - you have been pushing that envelope for years - I think that we could do stories on each that people would appreciate - ya might as ewll go with a naturally aspirated big bore, high compression stroker with # 3 then you wil have every base covered - triple nines....or maybe an eventual 8 or two...... you also have some of the best in your program with Sam and Sandy - Paul could do ya the stroker.... let's think up some good articles....Kevin

Hey Kaz - I just re read your post - man was that a good setup for a jab - buying a bike with an already melted motor - save you from needing to inflict the damage ....:), like pre-"broke"-in motor.... take care Kevin

Kaz - #3 - man you are scaring me - but you always have - you have been pushing that envelope for years - I think that we could do stories on each that people would appreciate - ya might as ewll go with a naturally aspirated big bore, high compression stroker with # 3 then you wil have every base covered - triple nines....or maybe an eventual 8 or two...... you also have some of the best in your program with Sam and Sandy - Paul could do ya the stroker.... let's think up some good articles....Kevin
Ya I tried to work a DEAL out with Paul for a MONSTER Big Bore but he has NO TIME FOR ME! :tmbsdow: I have a few Other engine Builders interested as well as a Big RaceTurbo Kit I'm working on so there gonna be some VERY EXCITING things comming in the Very Near Future! :mrgr:

Ya I tried to work a DEAL out with Paul for a MONSTER Big Bore but he has NO TIME FOR ME! :tmbsdow: I have a few Other engine Builders interested as well as a Big RaceTurbo Kit I'm working on so there gonna be some VERY EXCITING things comming in the Very Near Future! :mrgr:
What a bunch of crap, I'm truly amazed that he couldn't work you in his busy schedule. Could have been great exposure for him. I hope you find an engine builder that has time to take your $$$$.

What a bunch of crap, I'm truly amazed that he couldn't work you in his busy schedule. Could have been great exposure for him. I hope you find an engine builder that has time to take your $$$$.
Ya I'M REALLY DISAPOINTED in him Specially because I referred to Him to a Few People on the Forum! :yak: Thats OK Pissing Me Off Just Makes me Go Harder at My Goals and I'll remember THIS! :sinister:

Ya I'M REALLY DISAPOINTED in him Specially because I referred to Him to a Few People on the Forum! :yak: Thats OK Pissing Me Off Just Makes me Go Harder at My Goals and I'll remember THIS! :sinister:
p.s Rick allot of People Talk the Talk but I don't see them Backing it Up.I can count on One Hand the Companies that have'nt done this kinda stuff to me in My Quest for Speed!

Ya I'M REALLY DISAPOINTED in him Specially because I referred to Him to a Few People on the Forum! :yak: Thats OK Pissing Me Off Just Makes me Go Harder at My Goals and I'll remember THIS! :sinister:
Kas, I am sorry if you took me wrong. I did not mean the I did not want to build an engine for you. when you called me you wanted an engine over 200 RWHP in 2 weeks and I told you then that I didn't want to tell you that you would have the motor and then not come through. So I told you that I would not try that. There are a lot of people doing alot of talking but I don't see all this stuff getting done. I have had Eagle H-D bikes run 9.30's at 148 mph on dot tires with no wheelie bars at National events more than once. I know I can build big HP V-rods but they take time and I never seem to have enough of it. Sorry again If you took me wrong I would love to build you a motor and if you have someone else doing it I am available to answer any questions they have if I can help them in any way. You have my phone # call me if you want to. PAUL

PM Sent!Nuff said.

Well, I'm glad to see you two are talking about it. Some details have come out and we can understand more of this. Paul I know Kaz pretty well and I think he was disappointed that you couldn't build the motor in the time he needed. I hope you two can come to some kind of an agreement on future indevours. I too am wanting to push the envelope with my V-Rod. I cannot afford to do it the way Kaz does so I'm forced to learn this motor myself. It sure doesn't seem that complicated, I'm sure it is, but I going to give it a go. Can't be anymore complicated than the 1200hp turbo 4V Cobra motor I just finished, am I wrong.

the cobra motor you just mentioned ,, is that pushrod , and what cubic inch ? ,, thanks

A V-Rod MONSTER motor for Kaz sounds like a really good story.

Mostly 'cause we all love his story with this racing virus. Actually I'm doing SOMETHING and I do believe Eagle HD the best for the job. Know what? Whatever happens with Kaz and Paul I'm still on with Eagle HD. What's for sure is that it is like that ONLY because of Kaz's recomendations. I may like "Stripperella" better as a superhero ;) :stilpoke: but like Kaz better for the person he is. PLUS he gives good advice in other areas too :lick: :diablo: ;) :laugh: :kiss: .

http://www.v-rodforums.com/forums/attachment.php?attachmentid=13650&stc=1

the cobra motor you just mentioned ,, is that pushrod , and what cubic inch ? ,, thanks
No 4V=DOHC 281ci stock. ;)

No 4V=DOHC 281ci stock. ;)

ok ,, then its not really a cobra motor ,,but nice figures regardless