I just got mine and can't believe what I was missing. I thought a poll was in order to find out how many already have them and how many have plans for them.

I kept the dingleberrys with LED's because I liked the additional area of both running lights and break lights that they provide.

The good Doctor is now doing up a set of front turn signals so that I can complete the "LEDs behind smoked covers" look all around.

Thank you Doctor...

I'm just waiting on the parts that I need to redo the dogs ass then I am going to send them all out to doc for the whole setup licence plate light as well..... I think that from a safety stand point doc's lights make the most sence in the world, and from what people say his work is impecable..and that is the only kind of products I want on my bike.....I'm going to have my dad do it to his bike as well ........my dad has one of the nicest deuce's I have evr seen he realy likes chrome.......

I got the stage 2 and installed the rizoma light kit on the shocks. Cut off the dogs ass and just left the plate.

Have not seen it yet, maybe next week!

Love my Stage two taillight and combo run/brake/turn signals!!!

i plan to get one , and some pipes with income tax (poor) :sinister:

Got them and they rock!

My Favorite part was when the MAN Himself came down to custom wire and install them for me !:D The Worst part was when he_______________!;) All in All it's a Must Have!:fahr38

ohhh, fill in the blanks!!!


...when he ate all my Fruitty Pebbles

Ya on my Neighbors front Lawn!:eek:

you didn't even know that guy ;)

I do Now!:slap2:

and 5 min later I had the coolest damn light in the friggin world!
Before:http://www2.freepichosting.com/Images/77315/60.jpg
http://www2.freepichosting.com/Images/77315/61.jpg

During:
http://www2.freepichosting.com/Images/77315/62.jpg

AFTER!!!:
http://www2.freepichosting.com/Images/77315/65.jpg
http://www2.freepichosting.com/Images/77315/68.jpg
http://www2.freepichosting.com/Images/77315/71.jpg

Thanks DoC!:D

Mike

:thumb

Joe's light kicks f#cking ass! What a great product!!!!! :) :) :) :)


John

Originally posted by Ketsugo
Joe's light kicks f#cking ass! What a great product!!!!! :) :) :) :)


John

Ditto!!! :thumb :thumb

I have the Stage 2, front signals and license plate light from Joe. His lights not only kick ass, his work is impeccable, and he's an excellent guy to deal with. Joe is one of the good guys!

I like his work so much that I just place an order for the rear turn, run and brake lights, which I'll mount on the Rizoma relocators.

To anyone considering going this route (LEDs)...don't hesitate - buy from Joe! You will NOT be disappointed!!

Craig

DITTO what everyone else said => I've got his stage II, removed stock rear signals, with his license plate frame. :cool:
:D

John what took you so Long?:rolleyes:
Joe is a great guy as long as you don't let him ________ your_______ ________! :whack:

Ditto, to what has already been said. I think his product are awesome and he is a great guy to work with

Originally posted by Super Kaz
John what took you so Long?:rolleyes:
Joe is a great guy as long as you don't let him ________ your_______ ________! :whack:

What took me so long? I just got my light yesterday. :cheers:



John

He's had them out for 6 months?You just getting them now?I thought you were on the cutting edge of V-rod stuff!:rolleyes:

I don't like to pay retail.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2444285470


John

what was the retail price?:confused:

$200.00

all that to save $40?Man your CHEAP!;)

What do you guys think of running only the Stage 2 rear light w/ integrated turn signals and removing the stock signals completely? I like the looks, but do you think it is enough to catch a cager's eye when you are turning? My long term goal is to ditch the dog's ass and lower the rear end. I'd like to get away with not having to relocate the turn signals to the shock (I don't care for that look much), but I'll do it if I have to.

I started off with just the Stage 2 light (removed the turn signals and most of the dog's ass) and have recently decided to go for additional signals on the rear (Joe's LEDs mounted to the shock).

To be completely honest I think additional signals are the safest way to go. Obviously, the cleanest look is just the Stage 2 and it does provide signal lights. But on a real bright sunny day they are a little tough to see. Don't get me wrong, they are bright but it is just one row of LEDs and I don't think most people are used to looking at the taillight to see the signal lights.

I guess what it comes down to is how well you want to be seen. While the Stage 2 signal lights are visible, I wanted to be more visible on a bright sunny day and therefore went with the extra turn signals.

Craig

I have the stage II & removed the rear signals and like the looks alot :cool:
(see http://www.v-rodforums.com/forum/showthread.php?threadid=1097 picture on page 2)

but am still worried about the cagers in the daytime. Am considering adding some small signals over the winter.
:confused:

Originally posted by Super Kaz
all that to save $40?Man your CHEAP!;)


And I sure as hell didn't spend $29K for my bike! :rofl3:



John

well use some of your Saved Cash and Buy some new Carpet and some Furniture!:rolleyes:

And I sure as hell didn't spend $29K for my bike!

Thats what happens when you have more money then sense!:(
Had to have one of the First ones .That was with mods and extended warranty also!:slap2:

I thought I heard somewhere Kaz that a client of yours gave you your V-Rod? ;)

Yes She said buy what ever bike you want and thats what I GOT! :D

Excellent choice!...and Excellent Deal! :D

Anymore room in Vegas for another Neuromuscular Therapist ;)

There is a LONG Line ahead of ya!;)

Originally posted by Super Kaz
well use some of your Saved Cash and Buy some new Carpet and some Furniture!:rolleyes:

And I sure as hell didn't spend $29K for my bike!

Thats what happens when you have more money then sense!:(
Had to have one of the First ones .That was with mods and extended warranty also!:slap2:

ya, good thing you got that warranty :rolleyes:

I plan on ordering the stage 2 asap. Maybe go with clear lens if available. I will put it on as soon as the temp in the shop allows.
BobT

Just thought I'd revive this little blast from the past!!!!!

Shoot I know someone on this forum that's been waiting for his stage II since July or August 2004 and still doesn't have the his light. Don't know what the deal is with the DR. but I'm not to sure about ordering one from him. :hmm:

Shoot I know someone on this forum that's been waiting for his stage II since July or August 2004 and still doesn't have the his light. Don't know what the deal is with the DR. but I'm not to sure about ordering one from him. :hmm:

You've got to be $h!tt!n me....I ordered mine with the last group buy in November, couldn't mount it till last week when the weather finally broke and I could shovel a trail to the garage to find that the HD Aux brake module issue effected my light. I called the good DR. and he had 2 or three different ways to remedy the situation. He is good people....just call him and/or email him and I'm sure it will get worked out. :cheers:

hmmm well maybe the DR just forgot about him.

The squeaky wheel baby, the squeaky wheel!!!!

The squeaky wheel baby, the squeaky wheel!!!!

Well said my bratha well said.

well use some of your Saved Cash and Buy some new Carpet and some Furniture!:rolleyes:

And I sure as hell didn't spend $29K for my bike!

Thats what happens when you have more money then sense!:(
Had to have one of the First ones .That was with mods and extended warranty also!:slap2:


:rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :rofl:

[QUOTE=Ricky G.][SIZE=5]


Tried to e-mail Doc on this site and his site 5 times but never recieved an answer about tail lights,I wanted to know if you could have the tail light and turn sigs.as running lights as well brake and turn sigs.Hope I have made myself clear

[QUOTE=Ricky G.][SIZE=5]


Tried to e-mail Doc on this site and his site 5 times but never recieved an answer about tail lights,I wanted to know if you could have the tail light and turn sigs.as running lights as well brake and turn sigs.Hope I have made myself clear

Clear as mud !!!!! Seriously, give him a call the number is in the contact info on the website. I swear he'll get back to you.....he did me within 24 hours.

I emailed him a question on Wednesday and received a prompt response. I then submitted an order and received an immediate acknowledgement by email. I sure have no complaints so far.

I emailed him a question on Wednesday and received a prompt response. I then submitted an order and received an immediate acknowledgement by email. I sure have no complaints so far.

Right on Brotha'!!!! :cheers:

I've had a set on my 04"B" model since Aug.04...Putting a set on my 05 CVO...Joe sticks by his product....Should have my CVO back together by next week..I hope...Thanks Joe....

Any one in this Forum that doesn't have a set of Heavycycle's LED's ....don't know what they are missing....My retina's haven't recovered from my 1st set in Aug....BELIEVE ME!!!!

I am SO EXCITED!!! My v-light arrived yesterday (thanks, JOE!). Now I just have to get the time to install it. There are excellent directions with PICTURES, so I'm thinking that even I will be able to do this.

No pics of Joe without his pants, tho...

LOL... I paid for mine last August and still haven't received. Kinda of a special light..... :popcorn

LOL... I paid for mine last August and still haven't received. Kinda of a special light..... :popcorn

What makes this one so special OK VRod?

Well, I'm stuck at step 1 here (not surprisingly). Joe's directions say to insert a small screwdrive into the middle hole of the license plate lamp. There's only one hole there and there's nothing in it to push forward and up with a screwdriver that I can find.

Anybody got any ideas what I'm looking for here? There's a metal springclip-looking thing where the license plate lamp meets the fender, but pushing up and forward on that isn't doing anything either.

Yep the metal springclip looking thing is it. First time I took mine out I got a little frustrated. just gotta hold yer tongue right :mrgr: and it will release the light. once you get it out it's easier to see how it works and will come out real easy the next time.

Ed

I took off the fender and used some pliers to compress the spring. I was just afraid of jamming a screwdriver up a dark hole on my V-Rod....If you look at the new light, you will see the metal clip on the bottom. Looks like a clip for a thick stack of papers....

It helps if you pull up gently on the light housing as you poke/pry with the screw driver. I wound up taking a good look at Joe's new light to see how the spring clip was situated, and then it came right out on the next try.

It took a decent amount of pressure to release the light.

Good luck!

Dave

Well, moderate success here. I had to get Peter to get the old light out. Installing the new one was NO problem. But, in my usual fashion, I killed my license plates light in the process. Guess I just won't ride at night.

Sure is BRIGHT and V-ful!

Thanks for your help, guys -- looking at the springclip on the new one was the key.

They look great but YOU can't see it going down the road. :rofl2:

Come Sept we will !!!! :cheers:

They look great but YOU can't see it going down the road. :rofl2:

Come Sept we will !!!! :cheers:

VrodG....are you saying you admire Vals Back Side!!??? :twisted:

Looks like I'm going to have to go with one of Doc's set ups once I get my 240 kit on. Oh well it's only money....and well spent might I add

What makes this one so special OK VRod?
Blue Smooth chrome translucent lens.

VrodG....are you saying you admire Vals Back Side!!??? :twisted:

That's not really what I meant ! :surrender