Anybody out there with a destroyer figure out how to put a sidestand on it so you don't have to keep using that communist triangle.

:) use the street rod stand and mount and a dyna spring you have to cut the stand cause it is too long but it works

Great thanks

Why couldn't you use the "A" set up??

The "A" starts out lower to the ground and has the same frame (essentially) as the Destroyer.

Why couldn't you use the "A" set up??

The "A" starts out lower to the ground and has the same frame (essentially) as the Destroyer.

the "A" frame is different. the Destroyer has a different tab on the frame down tube that is more like the R.the A, Aw side stand is a different set up probubly because of the forward controls.
Rich V
VR 7
SG34
SS149

the "A" frame is different. the Destroyer has a different tab on the frame down tube that is more like the R.the A, Aw side stand is a different set up probubly because of the forward controls.
Rich V
VR 7
SG34
SS149
I just KNEW it wouldn't be THAT easy!!!

Exactly where are you "trimming" the Street Rod Stand???

Regards

i cut mine just below the tab then i welded a flat plate on the bottom of it.
every one will probobly be different depending on how much you lower the bike AHDRA you only need 2in clearance with 10PSI in the rear tire.
Rich V

THANKS VERY MUCH RICH!!!!!

I agree that the triangle is at best a scary solution to holding up the bike!!

I hope you have a GREAT HOLIDAY SEASON!!!

Are you coming down to Gainesville in the spring???

Jerry

Hi Jerry
YA i can't wait the race is Feb 29th March 1st and 2nd.
We leave on feb 28th only 72 days but whos counting.
Have a blessed CHRISTmas and a happy and save new year.
Rich V:ride:

Well I'll come and look you up in the pits!!!!

It's 78 degrees and sunny now!!!

I gave that cold weather up about 10 years ago but didn't wnat to give up all of the seasons by moving too far south.

I'm in JAX as you know so if you need anything on the way down don't hesitate to let me know.


Regards