|
crvte84 05-25-2004, 10:48 PM All, I have a 03 and I was putting on the rear turn signal relocator and took out the top bolt on the belt drive side and it was bent. I do have the shocks cut down by 1 inch. Do you think the rear end bottomed out and bent the shock. Has anyone had this problem? Darrin VrodRick74 05-25-2004, 11:22 PM All, I have a 03 and I was putting on the rear turn signal relocator and took out the top bolt on the belt drive side and it was bent. I do have the shocks cut down by 1 inch. Do you think the rear end bottomed out and bent the shock. Has anyone had this problem? Darrin I had the lower shock bolt bend on me. Cali-V 05-26-2004, 12:38 AM Remind ME to adjust my shocks from 1 to 4! After making the change to the chopped rear shocks, I'm bottoming out in turns... I gotta remember to stiffen my shocks... I'm 215lbs. what about you guys... what setting are riding? VrodRick74 05-26-2004, 01:03 AM Remind ME to adjust my shocks from 1 to 4! After making the change to the chopped rear shocks, I'm bottoming out in turns... I gotta remember to stiffen my shocks... I'm 215lbs. what about you guys... what setting are riding? I'm 235, I ride anywhere between 2 and 3 Vrod-tlam 05-26-2004, 07:49 AM I'm 220lbs & like #4, feels like it gives me a little more clearance when cornering hard. :twisted: crvte84 05-26-2004, 08:18 AM Hell, I'm only about 145 wife is about 125. I do most of my riding solo. I think I have mine on 3, with 1 inch cut down. Greg687 05-26-2004, 12:19 PM Not a bent bolt, but I did bend a shock when we git a pothole outside of San Antonio last year. Got a good set of used shocks at the dealer for $75. | ||