If you need a clock on your bike this is a good place to put one

http://www.v-rodforums.com/pics/000330.jpg

It's unobtrusive - you can't really see it while you're riding.
But it's there if you need it.

This is marketed as a bike clock but I have seen this done with a watch with the strap holders filed down.

http://www.v-rodforums.com/pics/000331.jpg

Of course fitting it was quite difficult. I had to peel the backing off BOTH sides of the sticky tape:D

:rofl3: :rofl3: :rofl3:

Looks great, Christine! Great work on the installation, too!

Christine


Where did you get the clock?

Frank,

I don't see the VRod but what about these:

http://www.clocks4bikes.com/

The Mo.Co. has one also but (personally) its a bit large. Breathless has an Oil temp mount which could work for a clock. Ideas???

Cheers, Juan

Originally posted by Frank Storms
Christine


Where did you get the clock?

It's by Motrax
http://www.motrax.co.uk/Accessories/Littleben.html

Don't know whether you can get them there.
(I note that it's water resistant to 30 meters. I don't plan on testing it:D )

Originally posted by Christine
I don't know whether you can get them there.


Seems you can though not in Florida

http://www.motrax.co.uk/Dealers/Index/World_america.htm

a V-Rod uses the same fork stem bolt cap as a Softail... FYI ;)

Unfortunately, Cycle Gear doesn't carry the clock.

http://www.cyclegear.com/dept.cfm


BTW Christine,
You lied! You previously stated your bike was completely stock!;)


John

Originally posted by DrHeathenScum
a V-Rod uses the same fork stem bolt cap as a Softail... FYI ;)

But shouldn't the V-Rod have a little faster clock?:rofl3:

I designed a really slick billet cap that has a hole for the Formotion clock that also fits in the Custom Chrome butt-ugly stem nut cap.

It's being manufactured by BilletBoys and should be out soon.

If anyone is interested, I'll post as soon as it is released.

Originally posted by Ketsugo


BTW Christine,
You lied! You previously stated your bike was completely stock!;)


John

Found out:D
I also have swing arm nut covers and a forward seat
Nothing that can't be reversed in a few minutes

Christine,
How is it you have a speedo in MPH and not KM?


John

Originally posted by Ketsugo
Christine,
How is it you have a speedo in MPH and not KM?


John
We still have miles in the UK. Don't know how long we'll get to keep them. We have litres but everyone converts them and works out mpg.
BTW OUR gallons are bigger the YOURS:D

"I designed a really slick billet cap that has a hole for the Formotion clock that also fits in the Custom Chrome butt-ugly stem nut cap.

It's being manufactured by BilletBoys and should be out soon.

If anyone is interested, I'll post as soon as it is released."


DrHeathenScum

Let me know when you are ready to sell them.

Same as a Softtail??? Then check these out. Any feedback?


http://www.marlins-motorcycles.com/clocks/?src=overture

http://www.marlins-motorcycles.com/clocks/?src=overture

VRSCB V-ROD ® with our Fork Stem Billet Clock Part # FSBC2

http://www.v-rodforums.com/pics/000333.jpg

Harley makes 2 that i know of, this is 1 of them.

http://www.v-rodforums.com/pics/000334.jpg

Here is the other one.


http://www.v-rodforums.com/pics/000335.jpg

Guys,

I ordered the Marlins clock and will report back on this post with pics and any details.

Juan

I'm still trying to figure out how to mount this.:confused:

http://www.v-rodforums.com/pics/000336.jpg



John

:rofl3:

ohhhh you mean on your bike.

Hey John,

those things have a keyhole, I'm sure you could "mount it".

Sorry couldn't hold that back!!! :biker: