Engine is out. Considering 1320 Zipper Kit:guns

stroke it!

You can change the rods and crank and go to 1350 a hole lot cheaper...Eagle's got the kit...

I have decided to give the zipper 1430 kit a try.:notworth:

Engine is out. Considering 1320 Zipper Kit:gunsI said it once"Your other Post"I'll say it again!:deal: Put some Low Comp Piston's in it and My New Trask Turbo System and Any and All Big Bore Stoker Blah,Blah Blahs,WONT HAVE A CHANCE:kaz: !!!!!Sorry Guy's But Your GONNA FREAK when You see My Bike Next :sinister: !PM me if Your interested and I will HOOK YOU UP!!!!!:thumb:

Hey V Jet, can you post pics of the failure? Or tell us more? My bike's in the same situation...still waitin for parts too!

I haven't had the courage to go look at my new bike in pieces. The thought of a stroker 1430 going back in is getting me over that mental picture; I'll visit the dealer today and will post pics.:sinister:

Hey dont worry - it aint so bad - soon you bi IDW again! with a stroker! Its all good!

I said it once"Your other Post"I'll say it again!:deal: Put some Low Comp Piston's in it and My New Trask Turbo System and Any and All Big Bore Stoker Blah,Blah Blahs,WONT HAVE A CHANCE:kaz: !!!!!Sorry Guy's But Your GONNA FREAK when You see My Bike Next :sinister: !PM me if Your interested and I will HOOK YOU UP!!!!!:thumb:
I`m not so sure!:karate

stroke it!
YOU KNOW IT!

I`m not so sure!:karate
Will Just Have to wait and " NO BILLET CASES:deal: " see what Your Real V-rod can do:popcorn ;) :kaz: !

:stupid: Ya - billet cases takes the game into a whole new realm - what is a stock case VR's ultimate ability...now thats the thing.:biker:
Bore it, stroke it, strip it, blow it...:duel:

Engine is out. Considering 1320 Zipper Kit:guns

Got any pics yet? Still curious...

No sorry. The motors gone to zipper.:plause:

So you had an oil pump failure on your 06 SE bike. Is this covered under warranty?

Reason I ask is I have one too...just wanted to know what happened to yours?

So you had an oil pump failure on your 06 SE bike. Is this covered under warranty?

Reason I ask is I have one too...just wanted to know what happened to yours?
Wow this is getting INTERESTING:eek: :wazzup: !No Power extra Power compaired to a stock R, and they are Blowing up:cuckoo !

Yes Warranty covers it.

still waiting for parts - but I think someone (you know who you are) is playing

Still waiting for pictures too...!

Machine Work is done, Waiting on full circle crank and Zipper will be sending her home.:cool:

v-jet, my 06SE just had the zipper's kit installed and heads to dyno tues.i chose to use mega-cycle cams and hillside cycle's heads instead.i also used the billet crank instead of my own.will have some preliminary numbers by end of week as the motor is broken-in on dyno.i would be interested in knowing what you end up with to see if i gained or lost by using the other components.good luck.:vrod:

What date was your engine shipped and when did you get it back?

hillside has had my bike since october.not exactly sure when they shipped to zipper's but i know they got it back the end of feb.goes to dyno tues.they were finishing the chain set-up in rear fri.

Wow sounds like they were busy. Mine was shipped just before Daytona bike week. What exhaust are you using? I am sticking with my SE Mufflers for now. I need a download for my racetuner, too!

i'm using bassani road rage 2-1.:ride:

:) OK Guys, here it is:birthday:

My motor is finally done!!!! :thumb: Wiseco 1320 kit, Megacycle 440's, D&D pipe.

Now I just need a map for PC. I have RT too somewhere, cant find it.

Any help with a map would be greatly apreciated

yikes! sorry to hear about that

!434BB will arrive and Tuesday, do you think I will need Destroyer injectors?? need download, too, to start and break it in before Dyno?

Considering these mufflers, too?
http://www.kess-tech.de/en/index.php?cPath=4000_4047_4048

From what I've read the guys running the 1550's are using stock injectors

From what I've read the guys running the 1550's are using stock injectors
why?They are Static most of the time when you have to run them that hard:2cents: .Putting in the extra fuel needed is done how?:moped:

I think you would adjust the dwell time to allow the injector to stay open longer. If I'm wrong someone will chime in

Hey SEVROD88,

Scott & company did my work too! I was the 1st V-Rod they ever did and they did an awesome job! I've not had a single problem or complaint. I tease them kids with the stock SE's.

Gave V-Jet Dave's number out in Mechanicville for the map info.

I think I saw your scoot on the table when I was getting my Dunlops switched over to the Metzler 880's I bought over the winter.

I'm planning on going to the Harley Rendezvou's in Pattersonville in June, you?

Hey Outlawbiker. My computer crashed and I lost Dave's number. Can you PM it to me again Thanks, also what exhaust are you running?

Done!

Thank You