Don't know if anyone knows about these, but I've had them on my lid for about a year now... I just stumbled upon their site again and figured I pass it along.

I have the black decals on a black helmet... very stealth looking under normal conditions, but they reflect a nice bright gold when lights hit them (coming from where you're looking from, of course, like any reflector)

The decals I purchased from them were very high quality, cut from 3M Scotch-Lite reflective sheet vinyl.

http://www.reflectivedecals.com/

Joe, are those the black ones in the pic you posted? Eric

yes, with the flash on.

they light up really nice.

I just ordered 2 sets of these for my and my wifes helmets,(Jet Chrome Domes.:D
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=35557&item=2450365448

I have them on my and wife's helmets. We picked up the flame styles. Look great and add safety but what a paint to install......

Redirected to the "products" forum.

Mike

Love how bright they are , Very good for visibility.
BobT

Joe, Thanks for the link. I ordered 2 different width black reflective pin striping tape. I think it will look sweet on the frame. we shall see. The stuff is cheap enough that if I don't like it, I'll take it off.................Eric

http://www.purpleharley.com/reflective_decals.htm

I got the skull flames off of e-bay from these folks.

Very cool Crash.... to bad they don't have wings, eh. I'd be interested to see/hear how they go on.
Mike (c/s Tripod:D )

The amature way to put on vinyl decals is to wet the back of the decal, the sticky part, and wet the helmet. That way you can get them into position easier, then squeegy the water and any bubbles out.

squeegy... I like that word :D

I'm working with one of the companies to get custom reflective shapes made. I wanted an F-16 for the back of my helmet...maybe they can do the V-Rod logo?? I'll let you know what I find out.

Hi everyone, we can cut any graphic on regular or reflective vinyl. Let me know if there is some custom V-ROD logo's people have in mind and I can cut some.

Ozzy

How about a decal that will fit on the back of our helmets .......Vrodforum........

Ozzy - can you do small quantities, or is the set-up time consuming. i.e. how does it work? Can it cut a decal from a picture from a bitmap, etc? This is what I'm looking for...about 3 inches high on black reflective tape.

I would like a smaller set of forum decals for my helmet. I'll even pay for them:D

i'd put a v-rodforum decal on my helet too. maybe somewhere on the frame even.

I will get with Max on the v-rodforum reflective decals, everything related to the site should go through him.

Crash, no problem with the decal you are wanting, just email me the best image you have of this and we can get several cut for you.

so... if I wanted some Heavycycles decals, that would be possible too? :D

btw, where do you find time?? ;)

I got my black reflective decals from purpleharley.com today. They look great and were a piece of cake to put on. They are cutting black reflective F-16 shapes for me also and shipping them out tomorrow. $20 for an 8 x 14 sheet with about 17 decals on it. Ozzy said he cut also cut custom shapes, but I had already asked this guy, Al, and he seems to have a good business and is a Vietnam Vet...I'll have to support Ozzy with other business later!:diablo:

I placed an order today for reflective decals for the v-rodforums.com logo with ozzy. They will be in black from what I understand. Sean said that I could look for them sometime next week.

Max

Count me in to acquire a few please Max!!
Thanks, Eric

pics of black reflective decals (stickers):
(w/ no flash)

W/ flash:

Very cool .Love the fact they are not highly visible until you want them to be(at low light situations).
BobT

I got my F-16 decals from Al at www.purpleharley.com They turned out great, and he made them in one day and shipped them the next...pretty awesome service!

very cool!

New decals (with flash):

This reflective decal thing is pretty cool! I might have to look into getting a couple done for myself.

Max, keep us posted on the v-rodforum decals, I'll buy one for sure.

Crash, what did you mount the decals to in your last pic. It's hard to tell. And does the bar and shield show in normal light since it has other colors in it?

Max.......Please put me on the list for the v-rodforum decals.
Thanks Greg

Ozzy's VROD ones look great. I'm planning to order a couple of sets.

I ordered one of Ozzy's VROD logos as well. I think it will look good on my black full face.

-Bry

fhrc - It's on my helmet...the same one that has the skull/flames on the sides. You can see the "DOT" label below the HD sticker. The HD sticker is a dealer sticker that I cut to remove their name (it is a normal sticker..not reflective).

Just got these in today, thanks Sean.

Max:
Can I make a donation or something?

Where's the dot???

V-Fred we didn't get a dot on these, I'm sure the dot would have been so small that it might have given problems on the mask.

Cali-V I did get a limited number and plan to try to get these and regular swing arm stickers out this weekend to members that have helped to support the forum. I will have a better idea if I have any left around sunday afternoon.

Max

Where's the dot???

http://www.lib.umich.edu/dss/old/EasyCD/screenshots/sharpie.jpg

:icon_mrgr

Max, are those reflective ?? all my helmets are black except my FF.

Yes John they are reflective but on a white helmet they don't show up correct. I'll put one on Jeannies helmet and take a pic.

Max