|
: AFR to use while running datamaster Jaben2 03-19-2010, 08:26 PM I am trying to tune the bike now after the stage 2 install. I am try to fine tune the bike now. The instructions state to set the AFR to 14.6 in all cells except the 100% to leave it 13.5. It just seems like it should be lower any ideas how where to put it at. I already ran it once it does a lot better already. Just looking for any good input. Thanks, Jaben2 03-20-2010, 10:42 PM Can anyone help out and let me know if this will be a decent starting point for my bike, or have any suggestions. I have a 08 DX with stage 2 cams, and indy outlaw pipe. o2man98 03-20-2010, 10:57 PM Just to give you an idea this is the 1250cc set up AFR table from the VRFI3. I have even gone richer then this on the 1402 to the point of high 11's at 100% TPS. Yes I know the pic is big. It is for a reason. http://www.moviephotoforums.com/photopost/data/500/1250VRFISetup.jpg | ||